Two-stage pressure reducer



Two-stage pressure reducer

♦Structural characteristics

1. Voltage regulation characteristics: the gas source pressure is in the range of 5-15 MPa, the inlet pressure changes by 1 MPa, and the outlet pressure changes by no more than 7X10-4 MPa.

2. Flow characteristics: When the inlet pressure is greater than 2 MPa, the regulated flow rate changes within the rated range, and the output pressure change is not more than ± 6% of the upper limit of the output pressure gauge.

3. Internal and external leakage rate: <5X10-9Pa.m3/s.

4. The diaphragm in the valve adopts a metal diaphragm to avoid secondary pollution of the high-purity gas by the rubber diaphragm.

5, high pressure structure and good sealing.

6. Compared with the oxygen regulator, the pressure characteristics are significantly improved.

7. The structure is compact and reasonable, and it has many filtering devices, which are tough and durable, and are convenient for replacement and operation of various gases.

8, the variety of specifications are complete, the performance price ratio is high.

♦ Main component materials


Main body: brass

High and low pressure cover: brass

Diaphragm: 316L

Seat: brass

Stem: nylon


Main body: 316L

High and low pressure cover: 316L

Diaphragm: 316L

Seat: 316L