Stainless steel pressure reducer



Stainless steel pressure reducer


Structural features

1. Voltage regulation characteristics: the gas source pressure is in the range of 5-15 MPa, the inlet pressure changes by 1 MPa, and the outlet pressure changes by no more than 7X10-3 MPa.
2. Flow characteristics: When the inlet pressure is greater than 2 MPa, the regulated flow rate changes within the rated range, and the output pressure change is not more than ± 6% of the upper limit of the output pressure gauge.
3. Internal and external leakage rate: <5X10-9Pa.m3/s.
4, the structure is small, light weight, suitable for gas pressure regulation of the vial of 8 liters or less.
5. The diaphragm in the valve adopts a metal diaphragm to avoid secondary pollution of the high-purity gas by the rubber diaphragm.

The main components of the material

1. Main body: brass
2. high and low pressure cover: brass
3. diaphragm: 316L
4. valve seat: brass
5. valve stem: nylon

1. Main body: 316L
2. high and low pressure cover: 316L
3. diaphragm: 316L
4. valve seat: 316L
5. valve stem: polychlorotrifluoroethylene